Related Manuals for Fujitsu LQFP-100P HEADER TYPE5
Summary of Contents for Fujitsu LQFP-100P HEADER TYPE5
- Page 1 FUJITSU SEMICONDUCTOR SS01-71048-1E SUPPORT SYSTEM DSU-FR EMULATOR LQFP-100P HEADER TYPE5 MB2198-129 OPERATION MANUAL...
- Page 2 ) to a user system. That uses Fujitsu FR family micro controller MB91270 series (LQFP-100P This manual explains the handling of the LQFP-100P header type5 for the DSU-FR emulator. Before using the MB2198-129, be sure to read this manual. Consult the Sales Department or the Support Department of adapter Fujitsu Limited for mass-pro- duction MCUs and evaluation MCUs.
- Page 3 (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
-
Page 4: Handling Precautions
This product is used as an emulator system by combining with an optional emulator and adapter board. Consult the Sales Department or the Support Department of Fujitsu Limited for the adapter or the emulator of this product. 2. Handling Precautions The header board is precision-manufactured to improve dimensional accuracy and to ensure reliable contact. - Page 5 3. Notes on Designing Restrictions of PC board for the user system Once the header board is connected to the user system, the heights of parts mounted in the space around the header board are restricted. The PC board of the user system must be designed with due consideration given to this restriction (Figure 1).
- Page 6 MCU footprint design notes Figure 2 shows the recommended dimensions of the NQPACK footprint mounted on the PC board of the user system. The PC board of the user system must be designed with due consideration given to this footprint as well as to the mass production MCU.
- Page 7 4. Procedure for Connecting the User System Before using the LQFP-100P header type5, mount the supplied NQPACK on the user system. The header board is used combining the emulator. Moreover, connection of a header board and an adapter board is two flat cables (a standard or Long)appended to the emulator main part. Please use it.
- Page 8 Screws for securing header board Washer Header board YQPACK NQPACK User system Figure 4 Header board connection Disconnection To disconnect the header board from the user system, remove all four screws, and then pull the head- er board straight out of the socket.
- Page 9 5. Mounting Mass Production MCUs To mount a mass production MCU on the user system, use the supplied HQPACK (See Figure 5). Mounting 1. To mount a mass production MCU on the user system, match the index mark ( ) on the NQ- PACK mounted on the user system with the index mark ( ) on the mass production MCU.
-
Page 10: Connector Pin Assignment
6. Connector Pin Assignment The signal of Evaluation MCU with which it was carried on the adapter board is connected to YQ- PACK (the same assignments as production MCU) via the flat cable connector (A,B) on a header- board. Connection of a header board and an adapter board is two flat cables (a standard or Long) appended to the emulator main part. - Page 11 Table 2 Pin assignment of the adapterboard connector A Connector Mass Production Production Connector Evaluation Mass Production Pin Numbers Pin Numbers Pin Numbers Pin Numbers Pin Numbers Pin Numbers...
- Page 12 Table 3 Pin assignment of the adapterboard connector B Connector Evaluation Mass Production Connector Evaluation Mass Production Pin Numbers Pin Numbers Pin Numbers Pin Numbers Pin Numbers Pin Numbers...
- Page 13 SS01-71048-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM DSU-FR EMULATOR LQFP-100P HEADER TYPE5 MB2198-129 OPERATION MANUAL April 2005 the first edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept.