Toshiba F Series Service Manual page 26

17) Connect the AC adapter to the gigabeat F series.
18) Hold down the POWER button.
19) When the date and time configuration screen is displayed, press the middle of the Plus Touch to exit the date
configuration screen.
20) In the main menu, select "SETUP" – "SYSTEM" to confirm the firmware version.
21) If a newer version of firmware is downloadable from the Website, download it and make an update according to the
procedure specified on the Website.
If updating Ver 1.xx to Ver 2.xxx, version upgrade is required for the PC software gigabeat room. Confirm that the
owner has gigabeat room 2.x for Ver 2.xxx, and then update Ver 1.xx to Ver 2.xxx.
Connect the gigabeat F series to the PC.
23) Start the Explorer. If the HDD of the gigabeat F series contains the ¥update folder, delete it.
24) Open the command prompt, execute the commands specified below, and add the SYSTEM and HIDDEN attributes
to the ¥GBSYSTEM.
attrib +S +H -R E:¥GBSYSTEM¥* /S /D
attrib +S +H -R E:¥GBSYSTEM
25) Close the command prompt.
26) Execute 9) to 11) above and remove the USB cable from the gigabeat F series.
23