Toshiba F Series Service Manual page 43

Step Photo
14
15
16
17
18
19
20
Description
Disconnect the backlight
cable (CN6).
Lift up the PJ2
connector with the
flathead screwdriver,
and disconnect it.
A view of the LCD
Assembly removed.
Release the lock of the
connector section and
disconnect the cable
from the side panel SW.
(CN4)
Release the lock of the
connector section and
disconnect the cross key
cable. (CN3)
A view of the cross key
removed.
Remove the HDD.
40
Note
Lift up the lock lever on
the side opposite to the
cable insertion direction,
and release the lock.
Lift up the lock lever
(black) of the connector
with the flathead
screwdriver and release
the lock.
Lift up the lock lever
(black) of the connector
with the flathead
screwdriver and release
the lock.
Insert the flathead
screwdriver between the
P.C. board and the HDD
shock absorber, and lift
up the HDD.
Tool
Flathead
screwdriver
Flathead
screwdriver
Flathead
screwdriver
Flathead
screwdriver
Flathead
screwdriver