NEC Express 5800/320Lc User Manual page 199

Change of SNMP Community
If the security setting of the SNMP Service of a system, where the NEC ESMPRO Agent is installed,
is changed from the default "public" to a community name, change the community settings of the
NEC ESMPRO Agent, too.
Double-click the [NEC ESMPRO Agent] icon in [Control Panel].
1.
Select a desired community name from the [SNMP Community] list box in [SNMP
2.
Setting] of the [General] sheet.
The community names to receive SNMP packets from are listed in the [SNMP
Community] list box.
Click the [OK] button to terminate the operation.
3.
Disk Maintenance While NEC ESMPRO Agent is Running
The following works to disks (hard disk drive or magneto optical) are not allowed while NEC
ESMPRO Agent is running;
·
To format or delete a partition by Disk Administrator or by other means.
·
To request programmatically to remove media from removable disks such as MO, Zip and PD.
Connect the machine using Web UI.
1.
Click the [Maintenance].
2.
Click the [Terminal Service]
3.
Log on as an administrator
4.
Select the [Start] – [Settings] – [Control Panel]
5.
Open the [Service]
6.
Select a service named "ESMCommonService", and click the [Stop].
7.
Confirm that "ESMCommonService" stopped, and close the [Service].
8.
Do the disk-related works.
9.
Open the [Service] again, select "ESMCommonService" and click the [Start].
10.
Confirm that "ESMCommonService" is active and close the [Service] and [Control
11.
Panel].
Installing and Using Utilities 5-23