Page 1
— I n s t a l l at i o n I n s t r u c t i o n Replace the softstarter PCBA PSTX30...370 Replace the PCBA 1SFA899300R1021 - PCBA...
Page 2
Safety information Important information: A qualified electrician must carry out installation, commissioning and service on the product by following installation standards and regulations. The product use hazardous voltage that can cause death or serious injury. Always disconnect power before working on equipment. Do not touch terminals when voltage is applied, output terminals can have live voltage even when the device is in off position.
Page 3
Softstarter, an antistatic strap must - Softstarter PSRC10, Installation and be used. The antistatic strap should be commissioning manual available on: worn on the wrist, and be connected https://solutions.abb/softstarters to an electrical ground, to prevent electrostatic discharge (ESD) damage to the Softstarter. CAUTION...