Name and address of dealer Attach or keep original receipt to assist with any repair under warranty. For Australian Customers Panasonic Australia operates a toll free Customer Support Centre. Please phone Panasonic on 132600 for assistance. For New Zealand Customers Panasonic New Zealand operates a toll free Customer Support Centre.
(AC 230 V–240 V, 50 Hz) AC Adaptor •USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL. •The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •To connect a standard telephone on the same line, see section 6-D.
1-E Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88AL headset. Only telecommunications compliance labelled headsets should be plugged into the headset jack on the handset. Connecting the optional headset to the handset Open the headset jack cover, and connect the optional headset to the headset jack as shown.
Speed Dialler You can store up to 10 phone numbers in the handset. The dialling buttons ((0) to (9)) function as memory stations. The TALK indicator light must be off before programming. •If a pause is required for dialling, press Press Special Features Pressing (RECALL) allows you to use special features of your host PBX such as call transfer or accessing a...
Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. 5-C How to Use the PAUSE Button...
•The battery cannot be overcharged. 6-B Battery Replacement If the RECHARGE indicator flashes after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic N4HKGMB00001 (P-P510) battery. Press the notch on the battery cover firmly and slide it as indicated by the arrow.
Things You Should Know 6-E Troubleshooting Problem Cause & Remedy •Check the settings (1-C). The unit does not work. •Charge the battery fully (6-A). •Clean the charge contacts and charge again (6-A). •Install the battery properly (6-B). •Place the handset on the base unit and unplug the AC adaptor to reset.
Page 8
Things You Should Know 6-G Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When left unused for a long period of time, the base unit should be unplugged from the household AC outlet.