Asus 4G-AX56 User Manual page 46

• Date to Enable Radio (weekdays): You can specify which
days of the week wireless networking is enabled.
• Time of Day to Enable Radio: You can specify a time range
when wireless networking is enabled during the week.
• Date to Enable Radio (weekend): You can specify which
days of the weekend wireless networking is enabled.
• Time of Day to Enable Radio: You can specify a time range
when wireless networking is enabled during the weekend.
• Set AP isolated: The Set AP isolated item prevents wireless
devices on your network from communicating with each
other. This feature is useful if you want to create a public
wireless network that only allow guests to access the
Internet. Select Yes to enable this feature or select No to
disable.
• Roaming Assistant: When your wireless environment
has provisioned a several APs (access point) or wireless
repeaters to cover all wireless dead zones. When a client that
connected on AP1 moves from one place with better signal
to another with poor signal, but there is an another signal
from AP2. To prevent the client stick on AP1, you can enable
Roaming Assistant, and set a minimal RSSI value as threshold.
When the connection quality lower than the threshold, AP1
disconnect the wireless client so that it can reevaluate the
wireless environment to select a AP with the best signal
quality, such as AP2.
• Enable IGMP Snooping: When IGMP snooping is enabled,
multicast traffic is only forwarded to wireless clients that are
members of a specific multicast group.
• Multicast Rate (Mbps): Select the multicast transmission
rate or click Disable to switch off simultaneous single
transmission.
• Preamble Type: Preamble Type defines the length of time
that the router spent for CRC (Cyclic Redundancy Check). CRC
is a method of detecting errors during data transmission.
Select Short for a busy wireless network with high network
traffic. Select Long if your wireless network is composed of
older or legacy wireless devices.
46