Asus 4G-AX56 User Manual page 78

To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can configure the following settings:
• Change the router login password: You can change the
password and login name for the wireless router by entering
a new name and password.
• Time Zone: Select the time zone for your network.
• NTP Server: The wireless router can access a NTP (Network
time Protocol) server in order to synchronize the time.
• Auto Logout: System will auto log out the administration
page after an idle period. To disable Auto logout, set the
value in 0.
• Enable Telnet: Click Yes to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Web Access from WAN: Select Yes to allow devices
outside the network to access the wireless router GUI
settings. Select No to prevent access.
• Enable Access Restrictions: Select Yes to set a whitelist
which allows administrator to limit and control access only to
trusted IP address.
a). Allow only specified IP address: Click Yes if you want to
specify the IP addresses of devices that are allowed access
to the wireless router GUI settings from WAN.
b). Specified IP Address: Enter the WAN IP addresses of
networking devices allowed to access the wireless router
settings. This Client list allows you to add the maximum IP
addresses of 4.
3. Click Apply.
78