Using Control Panel - LG WCD56US2 Owner's Manual

Using Control Panel

Units and Functions
AMBIENT button
This is the function to use ambient water.
1. Press the AMBIENT button.
2. When you press the Dispense button, ambient
water will come out.
• In case ambient water comes out continuously,
press any button to stop.
COLD button
This is the function to use cold water.
1. Press the COLD button.
2. When you press the Dispense button, cold
water will come out.
• If you wish to not use the cold water function in
order to save energy, press the COLD button
more than 3 sec. The cold water function will be
cancelled. To use cold water again, press the
COLD button more than 3 sec. The cold water
function will be set.
• In case cold water comes out continuously,
press any button to stop.
12
Cold water temperature icon
The cold water temperature is displayed in 3
levels.
• The icon is divided into 3 levels according to
the cold water temperature. As more indication
lamps turn on, the cold water becomes colder.
• The temperature cannot be adjusted
discretionally.
VOLUME button
This function dispenses cold water or ambient
water by separating the volume into 3 stages (120
ml, 500 ml, 1000 ml).
• When you press the AMBIENT or COLD
button, select the desired volume and press the
Dispense button, the selected volume of the
selected water type will dispense.
• The dispensed amount of water may vary
depending on the installation environment. If
an accurate measurement is necessary, use a
separate measuring device.
CONT. button
This function dispenses cold water or ambient
water continuously for up to 3 minutes.
• When another button is pressed while
dispensing water continuously, the dispensing
will stop.
Dispense button + FILTER CHANGE icon
This function is used for dispensing water.
This indicates the filter replacement period.
• The color indicating that the filter is usable is
blue. The color indicating that the filter should
be replaced is orange.