Phone Line Configuration - Philips CPWBS154 Instructions For Use Manual

Phone Line Configuration

Installing a Full-Rate Connection
If you are using a full-rate (G.dmt) connection, your service provider will
attach the outside ADSL line to a data/voice splitter. In this case you can
connect your phones and computer directly to the splitter as shown below:
Plain Old
Telephone
System (POTS)
Residential
Connection
Point [Network
Interface
Device (NID)]
Figure 2-3. Installing with a Splitter
Installing a Splitterless Connection
If you are using a splitterless (G.lite) connection, then your service provider
will attach the outside ADSL line directly to your phone system.
In this case you can connect your phones and computer directly to the
incoming ADSL line, but you will have to add low-pass filters to your
phones as shown below:
Plain Old
Telephone
System (POTS)
Residential
Connection
& Data
Point [Network
Interface
Device (NID)]
& Data
Figure 2-4. Installing without a Splitter
Voice
Splitter
Data
ADSL Router
or
Ethernet
hub or switch
Voice
Filter
Voice
Voice
ADSL Router
Data
or
Ethernet
hub or switch
ENGLISH
9