Panasonic SD-206 Service Manual page 123

6.2.1 Motor operation test
TOP PREVIOUS NEXT
1. Form the Initial test mode
2. The LCD display will indicate as shown, and the operation LED (Red) will light as shown by
fig Motor operation test LCD
3. The motor will begin operation in the order shown by fig
4. To return to
TOP PREVIOUS NEXT
(page), press the "MENU" pad once.
.
Initial test mode (page), press "START/STOP" pad once.
Motor operation test table
1.Forward (clock wise) revolution for 1.0 second. 2 times repeat
2.1.0second off.
3.Continuous forward (clockwise) revolution.
4.Stop for ten minute after, and initial test mode will light up.
Motor operation test LCD
Motor operation test table .