Connect To Power; Pair Up With The Subwoofer - Philips 7000 Series User Manual

Connect to power

•
Before connecting the AC power
cord, ensure you have completed all
other connections.
•
Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
1
Connect the mains cable to the AC~
socket of the soundbar and then into
a mains socket.
2
Connect the mains cable to the AC~
socket of the subwoofer and then
into a mains socket.
For EU
or
For UK
For EU
or
For UK
* Power cord quantity and plug type
vary by regions.
1

Pair up with the subwoofer

Automatic pairing
Plug the soundbar and the subwoofer
into the mains sockets and then press
on the unit or remote control to switch
the unit to ON mode. The subwoofer and
soundbar will automatically pair.
14 EN
AC~
2
» Determine the status based on
LED State
Fast blink
Constant on
Slow blink
Tips
•
Do not press Pair button on the rear of the
subwoofer, except for manual pairing.
Manual pairing
If no audio from the wireless subwoofer
can be heard, manually pair up the
subwoofer.
1
Unplug both the subwoofer from the
mains sockets again, then plug them
in again after 3 minutes.
2
Press and hold the Pair button on the
rear of the subwoofer for 3 seconds.
» The indicator on the subwoofer
3
3
Then press
or remote control to switch the
soundbar ON.
» The indicator on the subwoofer
4
If the indicator still keeps blinking,
repeat step 1-3.
Tips
•
The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
•
Remove any objects between the subwoofer
and the soundbar.
•
If the wireless connection fails again, check if
interference from an electronic device) around
interferences and repeat the above procedures.
the wireless subwoofer indicator.
Status
Subwoofer in pairing mode
Connected / Pairing successful
Pairing failed
will rapidly blink.
on the soundbar
will become solid when successful.