Play From Bluetooth Devices - Philips 7000 Series User Manual

Play from Bluetooth
devices
Through Bluetooth, connect the
soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
device through your soundbar speakers.
1
(Bluetooth) button on the
Press the
soundbar to switch the soundbar to
Bluetooth mode.
» NO BT is displayed on the display
panel.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
Philips TAB7807 to start connection
(see the user manual of the Bluetooth
device on how to enable Bluetooth).
3
Wait until you hear the voice prompt
from the soundbar.
» If the successfully connected, BT
is displayed on the display panel.
4
on your Bluetooth device.
•
During play, if a call comes in,
music play pauses. Play resumes
when the call ends.
•
If your Bluetooth device supports
control you can press / to skip
to a track, or press
resume play.
18 EN
to pause/
To disconnect and pair a new
Bluetooth device
1
In Bluetooth mode, Press
"BT PAIR" > Then press (Enter) to
disconnect all devices and enter the
Bluetooth pairing mode.
• Alternatively directly press and
hold button on the soundbar to
disconnect all devices and enter the
Bluetooth pairing mode.
» The soundbar voice prompt and
the display will show "PAIRING".
2
Follow step 2-3 in "Play from
Bluetooth devices" above to pair
your Bluetooth device.
Note
•
In an open space without obstructions.
The maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
> select