2.3
List of Jumpers
Please refer to the table below for all of the board's jumpers that you can configure for
your application
Label
Function
JP1
Clear CMOS Jumper, Auto Power Button Selection
2.3.1
Clear CMOS Jumper, Auto Power Button Selection (JP1)
Clear CMOS Jumper
Normal (Default)
Auto Power Button Enable/Disable Selection
Disable Auto Power Button/ ATX Mode
Note: To avoid damage to the system, do not connect pins 1,3,5 with pins 2,4,6.
Chapter 2 – Hardware Information
Clear CMOS
Enable Auto Power Button/ AT Mode
(Default)
10