Table of Contents
Advertisement
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations. These configurations are stored in the battery-backed CMOS
RAM and BIOS NVRAM so the information is retained when power is turned off.
To enter BIOS Setup, turn on the system and immediately press <Del> or <ESC>.
The following BIOS menus and their functions are listed below.
Main: Set the date and time, use tab to switch between date elements.
Advanced: Access advanced hardware options and settings.
Chipset – Chipset settings and options, including memory and graphics settings.
Security: Set setup administrator password and manage Secure Boot settings.
Boot: Boot Options, including Quiet Boot and BBS Priorities.
Save & Exit: Save changes to BIOS settings and exit BIOS program. Note: The system
may need to restart for changes to take effect.
Chapter 3 – AMI BIOS Setup
35
Advertisement
Table of Contents
