8. Install the filter container and tighten the brackets.
9. Connect the hose to the filter container.
10. Tighten the 3 snap locks on the filter container.
1883 - 001 - 01.06.2022
11. Install the handle and the 2 knobs.
To wash the filter
1. Remove the filter. Refer to
page 89 .
2. Wash the filter with a soft water jet. Start at the top of
the filter.
CAUTION:
water jet is soft and do not rub the filter.
3. Let the filter dry for one week in room temperature or
for 14 hours in 70 ºC.
CAUTION:
completly dry when it is installed.
To clean the cyclone cone
WARNING:
equipment, refer to
equipment on page 80 , during filter change.
Dust can come out during filter change.
To clean the filter on
Make sure that the
The filter must be
Use personal safety
Personal protective
91