Epson C3500 Setup Manual

Epson C3500
Shipment Content:
1 x Printer
1 x Ethernet Cable
1 x USB cable
1 x Power Adapter (2 parts)
1 x Maintenance Box
1 x Cleaning Kit
Quick Setup:
1. Connect the Power Adapter to the Power
Cable and the other end to the printer.
2. Option A: (Network) Plug in an Ethernet
Cable from the router's LAN port
the ethernet port behind the printer.
not to insert the cable into the USB port.
3. Option B: (Direct) Plug the USB-B cable
into back of printer and the USB-A end into
the computer USB port.
with Windows computers.
4. Push the Power Button by the top left
corner. The printer will take 20sec to 5min to
boot up and the LCD screen will display
"Ready".
5. Installing Ink cartridges, the printer comes
with Ink installed. Follow these steps to
replace empty Ink cartridges.
is not being used and in "ready" state.
a. Open the front right panel of the printer.
Do not
send any commands or turn off the
printer.
b. Push-release the empty cartridge softly to
release it from the printer then pull it out.
c. Shake the new Ink cartridge a few times
before removing it from its packaging.
Do not touch the IC chip in the cartridge.
Setup Video Guide:
Scan this QR code
with your phone
camera for video.
RENTAL EQUIPMENT
into
Careful
Driver compatible only
Only while printer
SETUP GUIDE
d. Insert the cartridge into the designated slot.
(KCMY) Push to secure. Close the ink door.
The printer will proceed to run the ink.
Contact our Support Team:
www.choose2rent.com/help
+1 (800) 622-6484 Ext. 3 (USA)
+49 40 226 360 - 590 (Europe)