Installation - Sanyo Camera Lens Instruction Manual

O C M
UTDOOR OLOR ODELS
Model Description
330TVL Color Camera (VCC-3954), 2.8-12mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
VSE-P2351HBSA
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
330TVL Color Camera (VCC-3954), 5.0-50mm AI Vari-focal Lens,
VSE-P2352HBSA 3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
520TVL Color Camera (VCC-6584), 2.8-12mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
VSE-P2361HBSA
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
520TVL Color Camera (VCC-6584), 5.0-50mm AI Vari-focal Lens,
3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
VSE-P2362HBSA
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
O D /N M
UTDOOR AY IGHT ODELS
Model Description
520TVL Day/Night Camera (VCC-4594), 2.8-12mm AI Vari-focal Lens,
4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
VSE-P2461HBSA
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
520TVL Day/Night Camera (VCC-4594), 5.0-50mm AI Vari-focal Lens,
VSE-P2462HBSA 4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
Blower, Sunshield, Pre-cabled, 24VAC, outdoor
CALL FACTORY FOR OTHER CONFIGURATIONS.
5

INSTALLATION

Attention: This installation should be made by qualified service
personnel and conform to the National Electrical Code and
applicable local codes.
5.1 Operating Voltage
Recommended operating voltage is 24 V AC, 60 Hz.
5.2 Preparing the Unit
Remove the mount and housing assembly from the carton.
5.3 Mount
Prepare and secure the mount to the wall or mounting
surface as described in the Mounts Instruction Manual
included in the installation document packet.
5.4 Housing
Feed the cabling from the housing foot through the mount.
Additional cables such as those used for RS-232 connections
can be fed through the back fittings. Attach the housing to
the mount using the screws and washers provided in the
hardware kit. For additional information, refer to the
Camera
VCC-3954
VCC-3954
VCC-6584
VCC-6584
Camera
VCC-4594
VCC-4594
Wall Mount Instruction Manual and
Housing Instruction Manual.
5.5 Line Power and Video Signal Connection
The external video coax cable is equipped with a BNC
connector to accept video signal. Route and connect video
cable to the BNC connector. The external power cable will
be provided to allow for necessary stripping/preparation by
the installer. For additional information, refer to the
Installation manuals included in the Installation document
packet.
5.6 Camera/Lens Adjustment
The camera and lens come factory configured and ready for
operation. If custom setup is required, refer to the camera
Installation Instructions included in the Instruction Booklet
Packet.
5.7 Sunshield
Sunshields are provided with the outdoor packages. Refer to
the Sunshield Installation Manual for information.
6
Lens Housing Mount
SVCL- VSE-
MTS-2000
HBS
CS2812VA 2300
SVCL- VSE-
MTS-2000
CS550VA 2300HBS
SVCL- VSE-
MTS-2000
CS2812VA 2300HBS
SVCL- VSE-
MTS-2000
CS550VA 2300HBS
Lens Housing Mount
SVCL- VSE-
MTS-2000
CS2812VA 2400HBS
SVCL- VSE-
MTS-2000
CS550VA 2400HBS