Setting The Date And Time - Sharp AM-900 Online Manual

Setting the Date and Time

The date and time appear in the fax mode display and are printed at the top of
every page you fax. Set the date and time as explained below.
If you will not be using fax mode, the date and time do not need to be set.
Note that the date and time will need to be reset if the machine is
unplugged or a power failure occurs. When the date and time need to be
set, the following messages appear in fax mode:
01/01 12:00
COPY SCAN
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press ) and then press
2
Press .
3
Press .
4
Enter a two-digit number for the month
("01" for January, "02" for February,
"12" for December, etc.).
Example: February
To correct a mistake, press
FAX
DATE/TIME UNSET
MENU
QUALITY CONTRAST
MENU
E-SORT REDIAL
Z A
ZOOM BROADCAST
FAX
!
DUPLEX SCAN PRINT STOP SPEED
ENTER
FAX
ENTER
MENU
.
The currently set
date appears:
Z
.
Setting the Date and Time
Display:
FAX SETTING
1: DATE&TIME SET
DATE 01-01-2005
DATE 02-01-2005
43