Philips AVENT SCF293 Manual page 16

5
Turn the on/off button to "Auto" mode. Then press it to
switch on the appliance.
• The appliance starts sterilising first. The entire progress
indicator lights flash to show the appliance is sterilising.
• After that, drying will start automatically� The progress
indicator lights flash and off gradually to show the
appliance is drying�
• When the whole process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot during
or shortly after operation.
6
Remove the lid.
7
Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful� The sterilised items may still be hot�
Note: Make sure you wash your hands thoroughly before you touch the sterilised
items.
Note: The drying result may vary depends on the ambient temperature, ambient
humidity and loading of steriliser. You can run one more drying cycle if necessary.
8
Unplug the appliance and wait until the appliance has cooled down completely.
9
Remove the small basket and large basket.
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
10
Detach the bottom plate from the large basket. Pour out any remaining water
from the large basket drip tray and clean it (see section "Cleaning").
- English 14 -
1
2