Drying - Philips AVENT SCF293 Manual

Drying

1
Assemble the steriliser (see section "Assembling the steriliser") and place the items
to be dried in it.
Note: Make sure all the items are completely disassembled and placed in the basket
with their openings pointing down for effective drying.
Be careful. Hot steam will come out of the steriliser when drying starts.
2
Place the lid on top of the small or large basket.
3
Put the plug in the wall socket.
4
Turn the on/off button to "Dry" mode. Then press it to
switch on the appliance.
• Drying will start after about 30 seconds� The appliance
warms up to produce warm air to dry items�
• The progress indicator lights flash and off gradually to
show the appliance is drying�
• When the drying process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot during
or shortly after operation.
5
Remove the lid.
6
Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful� The dried items may still be hot�
Note: Make sure you wash your hands thoroughly before you touch the dried items.
Note: The drying result may vary depends on the ambient temperature, ambient
humidity and loading of steriliser. You can run one more drying cycle if necessary.
7
Unplug the appliance and wait until the appliance has cooled down completely.
- English 15 -
1
2