Charge Your Phone - Nokia X6 Manual

Hide thumbs Also See for X6:

Table of Contents

Nokia X6 Manual del usuario

2. If you have a single-SIM phone, put a nano-SIM card in slot 1 and a memory card in slot 2

on the tray with the contact areas face down. If you have a dual-SIM phone, put a nano-SIM

card in slot 1 and either a second SIM or a memory card in slot 2 with the contact areas face

down.

3. Slide the tray back in the slot.

Use only compatible memory cards approved for use with this device. Incompatible cards may

damage the card and the device and corrupt data stored on the card.

Important: Network access license is needed for verifying that your phone is authentic,

please keep it in a safe place.

Remove SIM and memory card

1. Open the SIM and memory card tray: push the tray opener pin in the tray hole, and slide the

tray out.

2. Remove the cards.

3. Slide the tray back in the slot.

Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device,

and may corrupt data stored on the card.

CHARGE YOUR PHONE

Charge the battery

1. Plug a compatible charger into a wall outlet.

2. Connect the cable to your phone.

Your phone supports the USB type C cable. You can also charge your phone from a computer

with a USB cable, but it may take a longer time.

If the battery is completely discharged, it may take several minutes before the charging

indicator is displayed.

Table of Contents