Toro Lynx Manual page 20

DT34/DT54 Series
DT34
DT34 Conversion Assemblies
Models Description
DT34-3134 DT34 w/31–34 Nozzles
(33 Nozzle Installed)
DT34-3537 DT34 w/35–37 Nozzles
(35 Nozzle Installed)
DT34-3134E DT34 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
DT34-3537E DT34 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
DT54 Conversion Assemblies
Models Description
DT54-5154 DT54 w/51–54 Nozzles
(53 Nozzle Installed)
DT54-5558 DT54 w/55–58 Nozzles
(55 Nozzle Installed)
DT54-59 DT54 w/59 Nozzle
DT54-5154E DT54 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
DT54-5558E DT54 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
DT54-59E DT55 w/59 Nozzle, Effluent
102-5011 690 Adapter allows you
to upgrade any 690 with
DT54 conversions
Body
Arc
Inlet Threads
DTX4 X
3—1" 4— Full Circle 0—NPT
5—1 ⁄ " 4—ACME
1
2
5—BSP
Example: When specifying a DT34 Series Sprinkler with NPT threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar),
20
DT54
S p e c i f y i n g I n f o r m a t i o n — D T 3 4 & D T 5 4
Body
Valve Type
X X
1— Normally Open Hydraulic
2— Check-O-Matic
6—Electric
you would specify: DT34–06–346
Features
• Dual trajectory adjustment of the main nozzle—25° or 15°
• Constant velocity full circle drive
• Stainless steel valve seat is molded to the body and has
virtually eliminated body replacements due to seat damage
Operating Specifications
• Inlet:
• DT34: 25mm (1") NPT, BSP or ACME
• DT54: 38mm (1.5") NPT, BSP or ACME
• Radius:
• DT34: 15,9 – 27,8m (52' – 91')
• DT54: 15,9 – 30,2m (52' – 99')
• Flow Rate:
• DT34: 49,2-177,5 LPM (13.0 – 46.9 GPM)
• DT54: 50,0-233,9 LPM (13.2 - 61.8 GPM)
• Precipitation Rates:
• DT34: Minimum: 8,4 mm/hr (.33"/hr);
Maximum: 13,9 mm/hr (.55"/hr)
• DT54: Minimum: 8,4 mm/hr (.33"/hr);
Maximum: 15,5 mm/hr (.61"/hr)
• Pilot Valve: Selectable at 3,5; 4,5; 5,5; and 6,9 Bar (50, 65,
80 and 100 psi)
• Recommended Operating Pressure Range:
• 4,5-6,9 Bar (65-100 psi)
• Maximum: 10,3 Bar (150 psi)
• Minimum: 2,8 Bar (40 psi)
• Electric Valve-in-Head Solenoid: 24V ac, 50/60 Hz
• Inrush: 50 Hz, 0,33 Amps; 60 Hz, 0.30 Amps
• Holding: 50 Hz, 0,28 Amps; 60 Hz, 0.20 Amps
• Trajectory: 25° or 15°
• Check-O-Matic maintains up to 11,2m (37') elevation
Nozzle Selection
• DT34 has seven nozzle variations (31, 32, 33, 34, 35, 36
and 37)
• DT54 has nine nozzle variations (51, 52, 53, 54, 55, 56, 57,
58 and 59)
• Three opposing nozzles, rotating stream pattern
• Two additional front nozzle positions provide maximum
flexibility
• Stator variations: DT34–2 and DT54–3
• Optional radius reduction screw 363-4839 for fine tuning
the radius
Dimensions
• Body diameter:
• DT34: 16,5cm (6 .5")
• DT54: 19cm (7.5")
• Body height:
• DT34: 25cm (10")
• DT54: 29cm (11.38")
• Weight:
• DT34: 1,35kg (2.98 lbs.)
• DT54: 1,68kg (3.70 lbs.)
• Pop-up height to nozzle: 8,25cm (3.25")
Warranty
• Two years
DTX4-XXXXX
Nozzle
X X
DT34
31 32 33 34 35 36 37
DT54
51 52 53 54 55 56 57 58 59
* Electric models only. All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Pressure
Optional
Regulation*
X
6— 65 psi (4,5 Bar) E— Effluent Model
8— 80 psi (5,5 Bar) DL— Decoder Model
N— Nickel- plated Model
Note: Not all models available.
X