D-Link DPN-100 Quick Installation Manual page 3

• The DPN-100's bail is in the closed (locked) position.
• The DPN-100's dust cover is inserted into the SC/APC fiber opening.
4. Insert the DPN-100 into the target SFP socket until you feel (or hear) the latch mechanism "click."
5. Verify that the DPN-100 is seated properly by holding the DPN-100 at the sides and trying to remove it
with the SFP bail in the locked position. If the DPN-100 can be removed, reinsert it and press hard on the
SFP dust cover to insert the module more securely.
Configuration
Fiber Connection to the DPN-100
1. Remove the DPN-100 module dust cover and keep it for future use.
2. Remove the dust cap from the tip of the GPON fiber cable and keep it for future use. Clean the tip if
necessary.
3. Connect the fiber cable to the SC/APC port on the DPN-100.
Warning: Invisible LASER radiation may be emitted from the end of the fiber and/or from the DPN-100.
Take all necessary precautions to avoid exposure to this radiation.
3