Location And Function Of Controls; Front Panel - Sony UCP-8060 Operation Manual

Location and Function of Controls

Front Panel

1System indicator
2Status indicator
3Memory Stick slot
a System indicator
Lights in red, orange, or green to show the system
operation status.
When the power is supplied to the UCP-8060, this
indicator lights in red, and it turns orange when the system
starts. When hardware configuration is finished, the
indicator lights in green. If the above procedures cannot be
performed and the indicator remains lit in red or orange,
there may be a hardware or system file problem.
b Status indicator
Lights in red, orange, or green to show the status of access
to the memory stick slot or of the internal system.
c Memory Stick slot
Insert a Memory Stick with the label side up.
For details, refer to the Installation Manual of the UCP-
8060 or the User's Guide of the Operation Software used.
d Jog L, R buttons
The left button is the jog L button, and the right one the jog
R button. Press to change the layer of the menu.
For details, refer to the User's Guide of the Operation
Software used.
e Jog roller
Turn the roller to select an item or change a value. Press the
roller to execute the selection.
32
Location and Function of Controls
SYSTEM
6Function buttons
5Jog roller
4Jog L, R buttons
7Select L, R buttons
For details, refer to the User's Guide of the Operation
Software used.
f Function buttons
These buttons are called the function 1, 2, ... 5 button from
the top, and light in red, orange, or green according to the
operation status. A function of a button depends on the
operation software used.
For details, refer to the User's Guide of the Operation
Software used.
g Select L, R buttons
The left button is the select L button, and the right one the
select R button. Press these buttons to perform the function
displayed at the corresponding position on the task bar
(page 34). The screen display will change accordingly.
For details, refer to the User's Guide of the Operation
Software used.
h Display window
Shows a menu or data. The window functions as a touch
panel, and you can select a function by touching an on-
screen object representing it. The items displayed depend
on the operation software used.
For details, refer to the User's Guide of the Operation
Software used.
UCP-8060
9Control knobs
8Display window