7
PROGRAMMING
7.1
7.1.1
Setting item
Preset value setting
Coincidence detection point
change request
Coincidence detection point
setting
Ring counter lower limit value
Ring counter upper limit value
Period setting [unit: 10ms]
Downloaded from
ManualsNet.com
Program Example when GX Configurator-CT is Used
GX Configurator-CT operation
(1) Initial setting (refer to Section 6.4.)
Figure 7.2 shows settings have to be made.
Table 7.5 Items on the [Initial setting] screen
Set the preset value.
Set this to enable the coincidence detection point setting.
Set the value for coincidence detection point.
Set this only when using the ring counter function.
Set this only when using the ring counter function.
Set this only when using the periodic pulse counter function.
search engine
Figure 7.2 [Initial setting] screen
Description
7.1 Program Example when GX Configurator-CT is Used
7.1.1 GX Configurator-CT operation
1
2
3
4
5
Setting
2500
Change
6
request
1000
-5000
5000
500
7
8
7
- 3