Yamaha XMAX 2022 Owner's Manual page 37

While the V-belt replacement tripmeter
is flashing, hold the "TRIP" switch for
15 to 20 seconds. Release the "TRIP"
switch, and the V-belt trip value will re-
set to zero.
TIP
If the V-belt is replaced before the V-
belt replacement indicator comes on
(i.e., before the periodic V-belt replace-
ment interval has been reached), the V-
belt replacement tripmeter must be re-
set for the V-belt replacement indicator
to come on at the correct time.
Information display
1. Information display
The information display is equipped
with the following displays:
 Air temperature "Air-temp"
 Battery voltage "Battery"
 Traction control system "TCS ON"
or "TCSOFF"
 Average fuel consumption "Con-
sumption + Average km/L" or
"Consumption + Average L/100
km" or "Consumption + Average
MPG"
 Instantaneous fuel consumption
"Consumption km/L" or "Con-
sumption L/100 km" or "Con-
sumption MPG"
 Average speed "Average"
 Warning message function
Use the "INFO" switch to cycle be-
1
tween the displays in the following or-
der:
Air-temp → Battery → TCS ON or TC-
SOFF → Consumption + Average km/L
→ Consumption + Average L/100 km
→ Consumption + Average MPG →
Consumption km/L → Consumption
L/100 km → Consumption MPG → Av-
erage → Air-temp
5-7
Instrument and control functions
TIP
 When kilometers are selected as
the display units, "Consumption +
Average MPG" and "Consump-
tion MPG" are not displayed.
 When miles are selected for the
display units, "Consumption + Av-
erage km/L", "Consumption + Av-
erage L/100 km", "Consumption
km/L", and "Consumption L/100
km" are not displayed.
Air temperature display
2
1. Air temperature display
2. Icy road warning indicator "
This display shows the air temperature
from 14 °F to 122 °F in 1 °F increments.
5
1
"