Yamaha XMAX 2022 Owner's Manual page 41

Dimmer/Pass switch "
Set this switch to " " for the high
beam and to " " for the low beam.
To flash the high beam, push the
switch down towards "PASS" while the
headlights are on low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
EAU54203
/ /PASS" Stop/Run/Start switch "
To crank the engine with the starter,
set this switch to "
the switch down towards "
page 7-2 for starting instructions prior
to starting the engine.
Set this switch to "
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
Hazard switch " "
With the main switch in the "ON"
or " " position, use this switch to turn
on the hazard lights (simultaneous
flashing of all turn signal lights).
EAU12461
The hazard lights are used in case of an
"
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
". When
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
EAU12501
Instrument and control functions
EAU54213
/ / " "TRIP/INFO" switch
This switch is used to make setting and
", and then push display changes in the multi-function
". See meter unit. See page 5-3 for more in-
formation.
To use the "TRIP" switch, move the
" to stop the en- "TRIP/INFO" switch in direction (a). To
use the "INFO" switch, move the
"TRIP/INFO" switch in direction (b).
EAU78190
1
1. "TRIP/INFO" switch
ECA10062
5-11
EAU78491
5
(a) (b)