Advertisement
4. Procedure for set
I Setting the jumper plug to switch the C terminal
The jumper plug for switching the C terminal on the probe header is used to switch the C terminal
capacitive-termination.
A 0.1 µF capacitor is mounted on the probe header to perform C terminal capacitive-termination.
Depending on the operating environment, change the setting of the jumper plug to select whether
C terminal capacitive-termination is performed on a user system or on the probe header. When
the product is delivered, the jumper plug is set to side 3 (the probe header side). When C terminal
capacitive-termination is done on the user system, set the jumper plug to side 1.
C terminal
capacitive-termination is
performed on a user system.
Figure 2 Setting the jumper plug to switch the C terminal
C terminal
capacitive-termination is
performed on the probe header.
3
Advertisement
