Changing Values And Settings For A Cooking Programme; Changing The Temperature - Miele DG 7240 Operating And Installation Instructions

Operation
Cleaning the steam oven
 If necessary, remove the condensate
tray from the oven compartment and
empty it.

Risk of injury caused by hot
water.
At the end of a cooking programme,
hot water left in the steam generator
is pumped back into the water
container.
Take care not to tip the water
container when taking it out of the
appliance.
 Remove the water container.
 Remove the spill guard and empty
the water container.
 After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
Make sure the spill guard engages
correctly when installing it.
 Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the
container with fresh water.
 Take out the water container and
replenish the water.
 Push the water container into the
appliance.
The cooking programme is resumed.
44
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
–
Temperature
– Duration
– Finish at
– Start at

Changing the temperature

You can change the temperature for the
 and
Steam cooking
functions.
You can permanently reset the
recommended temperature to suit
your cooking preferences by selecting
Further  | Settings
temps. .
 Select the  or  arrow buttons or
swipe to the right or left in the
       area.
The desired temperature appears in the
display.
 Change the desired temperature via
the navigation area.
The temperature changes in 5 °C steps.
 Confirm with OK.
The cooking programme will restart with
the new desired temperature.
Eco Steam cooking
 | Recommended