Operation
Cleaning the combination steam oven
after a cooking process
Remove the water container and
condensate container and empty
them as required.
Switch the combination steam oven
off.
appears after a cooking
Appliance rinsing
process involving steam.
Follow the instructions on the display.
The rinsing process should be carried
out every time to flush any remaining
food deposits out of the system.
If you have selected
|
in the settings menu,
QuickTouch
Off
you will have to switch the
combination steam oven on in order to
open the door.
Clean and dry the whole combination
steam oven as described in "Cleaning
and care".
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the
container with fresh water.
Take out the water container and
replenish the water.
Push the water container into the
appliance.
The cooking programme is resumed.
62
|
Display
Changing values and settings
for a cooking programme
Depending on the function, as soon as a
cooking programme is in progress, you
can change the values or settings for
this programme.
Depending on the function, you can
change the following settings:
-
Temperature
-
Moisture
-
Duration
-
Booster
-
Pre-heat
-
Crisp function
Changing the temperature and core
temperature
Go to
|
Settings
Recommended
to permanently adjust the
temperatures
recommended temperatures to suit
your cooking preferences.
The core temperature only appears
if you are using the food probe (see
"Roasting – Food probe").
Touch the temperature display.
Change the temperature and the
core temperature if necessary.
Confirm with OK.
The cooking programme will restart with
the new desired temperatures.
Changing the Moisture
Touch the moisture indicator.
Change the moisture level.
Confirm with OK.
The programme will continue to run at
the new moisture level.