Toshiba MA-600 Programming Manual page 127

6. TERMINAL FILE PROGRAMMING
• The HALO and LALO programmed here are effective at the department entry in REG mode only. They
are not effective in MGR and - mode, as a maximum of 7-digit amount value can be entered.
• Zeros must be entered as all the digits other than the highest digit. If any other value is entered, it will be
regarded as a zero.
Example) Entering 4001 to 4999 will all result in setting 4000.
2. Regarding a department of which amount limit is individually preprogrammed, the HALO and LALO
programmed here will be ignored.
3. The HALO and LALO programmed here are cancelled at the department entry by depressing the [LC
OPEN] or [OPEN] key. (i.e. Amounts of 2-digit more than HALO and of 1-digit less than LALO can be
entered, up to a maximum of 7 digits.)
A maximum of 7-digit amount value can be entered in MGR and - mode.
3) Example
To program 100000 for HALO and 10 for LALO.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
Depress the [3] or [Enter] key.
Depress the [1] or [Enter] key.
Depress the [↓] key twice.
Depress the [3] or [Enter] key.
Input 100000, then depress the [Enter]
key.
(HALO: 100000)
LCD Display
(continued on the next page)
6-107
6.21 Department Listing Capacity (LC) Programming
Remarks
The cursor is moved on to "3 DP/PLU".
"3 DP/PLU" is selected.
"1 DP" is selected.
The cursor is moved on to "3 DIGIT LIMIT
(PRICE)".
"3 DIGIT LIMIT (PRICE)" is selected.
While ? is shown on the upper-right corner
of the LCD display screen, the [?] key
depression results in that the following
guidance message appears on the LCD
display.
EO3-11106