Set - Toshiba MA-600 Programming Manual

6. TERMINAL FILE PROGRAMMING
ADDRESS NO.
11
BIT
ITEM
NO.
1
-- vacant --
2
-- vacant --
3
-- vacant --
4
-- vacant --
[C] (Clear) Key Counter
5
on Reports
Financial and Cashier
6
Daily Read Counter on
Reports
7 -- vacant --
[C] (Clear) Key on
8
Journal
NOTE 1: If RESET, when performing a financial read/reset or cashier read/reset operation, their respective read counter (X counter) is
printed on the report. (For details, please refer to the Table below.) The read counter (X counter) increases by one regardless of
this bit status.
Table: X counter and Z counter print
Daily Read
Daily Reset
GT Read
GT Reset
NOTE 2: The descriptor "CLEAR" (programmable) is printed on Journal every time the [C] key is operated in the REG mode to clear a
numeric value or declaration key error. However, it will not be printed when the [C] key is depressed to clear an error condition.
Additionally, this printing will not be recorded in the MGR or - mode. It will be performed neither on the Receipt nor Remote Slip
Printer in any mode.
System Option Table
CONTENTS
NON-PRINT OPTION III
SELECTIVE STATUS
RESET

SET

RESET
SET
RESET
SET
RESET
SET
RESET COUNT
SET NON-COUNT
RESET PRINT
SET NON-PRINT
RESET
SET
RESET PRINT (NOTE 2 below)
SET NON-PRINT
Daily
X Counter Z Counter
Printed ---
Printed Printed
--- ---
--- ---
- - Address Nos. 12 to 16 are vacant. - -
GT
X Counter Z Counter
--- ---
--- ---
Printed ---
Printed Printed
6-28
6.5 System Option Programming
Standard Bit Set (auto-set by RAM Clear)
STANDARD
REMARKS
STATUS
*
*
*
*
*
NOTE 1 below
*
*
*
EO3-11106
568