Table of Contents
Advertisement
Parts identification
Main body
1 Trimming height
indication mark
2 Dial (Height adjustment
control)
3 Power switch
4 Charge status lamp
5 Appliance socket
6 Water inlet
Blade
7 Cleaning lever
8 Moving blade
9 Stationary blade
0 Mounting hook
Comb attachment for
beard [
]
(1 mm to 10 mm)
Comb attachment for
hair [
]
(11 mm to 20 mm)
Comb attachment for
body hair
AC adaptor
(RE9-86)
Adaptor
Power plug
\ Cord
q Appliance plug
Accessories
Cleaning brush
Oil
Pouch
Charging the trimmer
• Make sure that the trimmer is turned off.
1
Connect the appliance plug to
the appliance socket.
2
Plug in the adaptor into a
household outlet.
• Check that the charge status
lamp glows.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor when the charge status
lamp stops glowing.
Notes
• Recommended ambient temperature for charging is
0 °C – 35 °C. Battery performance may decrease
outside of the recommended temperature.
• A full charge supplies enough power for approximately
50 minutes of use.
(Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the
frequency of use and the operating method.
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
2
1
7
Hide quick links:
Advertisement
Table of Contents
