Siemens Hicom 300 User Manual page 11

Call Forwarding Preset
Calls for the secretary can be forwarded to a predetermined extension for
answering.
This can be to either a Digital or analogue extension.
Program Preset Extension Number
- press Programme key
- display shows - PRESS FEATURE KEY
- press Call Forward key twice
- display shows - NOTHING STORED
- dial required extension number
- press Programme key
- display shows - FORWARDING STORED
- Call Forward LED is on (i.e. feature is activated automatically)
- display shows - FORWARDING TO
The predetermined extension number has now been permanently programmed.
Calls will now go to the Preset destination immediately.
Deactivate Call Forwarding
- press Call Forward key
- Call Forward LED goes off
- display shows - FORWARDING
When Preset Call Forward destination has been programmed but deactivated
it will serve as Call Forward No Answer i.e. If your extension rings for longer
than +/- 25 seconds it will automatically divert to the Preset extension number.
OR DIAL CODE
NEW NUMBER?
EXT NO NAME
DEACTIVATED
11