Timed Reminder - Siemens Hicom 300 User Manual

Timed reminders or alarms can be programmed to remind you of meetings or
appointments.
Set Timed Reminder (e.g. 3:30 pm)
- press Remind or Programme key + ∗ ∗ ∗ ∗ ∗ 23
- display shows - REMINDER
- enter 1530
- press Programme key
- display shows - STORED
- Remind LED is on
Alarm will sound for 30 seconds at 15:30, or stop if Remind key is pressed.
If Remind key is not pressed then alarm will be repeated after 5 minutes and
then automatically cancelled.
Display Timed Reminders
- Remind LED is on
- press Remind key to scroll for alarms
- display shows - REMINDER
Cancel Timed Reminder
- press Remind key until required alarm is displayed or Prog + ∗ ∗ ∗ ∗ ∗ 23
- press Delete key
- display shows - DELETED
- Remind LED goes off if this is the last remaining alarm
40

Timed Reminder

NOTHING STORED
- or time of current alarm/s
if Remind LED is on
15:30