Connect the IR pass-through cable 13 Connect to Power Pairing with Subwoofer (FW1) via proprietary RF link Connect to Wi-Fi (Wireless Operation) Connect the soundbar to Philips Play-fi enabled TV 4 Use your Soundbar Turn ON and OFF Select Modes Adjust the Volume...
1 Important from the power outlet immediately. Contact Consumer Care to have the safety product checked before use. • Never place the product and instructions accessories near naked flames or other heat sources, including direct sunlight. • Never insert objects into the Read and understand all instructions ventilation slots or other openings before you use your product.
• Never place the product or any Care for your product objects on power cords or on other electrical equipment. Use only microfiber cloth to clean the • If the product is transported in product. temperatures below 5°C, unpack the product and wait until its temperature matches room Care of the environment temperature before connecting it to...
Help and support For extensive online support, visit www.philips.com/support to: For 5G Wi-Fi Device • download the user manual and the quick start guide The device for operation in the • watch video tutorials (available only band 5150–5350 MHz is only for...
et votre corps. Cet transmetteur ne FCC information doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur. NOTE: This equipment has been tested • and found to comply with the limits Des câbles blindés doivent être for a Class B digital device, pursuant to utilisés avec cet apparei l pour assurer la conformité...
Images, illustrations and drawings shown on this User Manual are for reference only, actual product may Congratulations on your purchase, vary in appearance. and welcome to Philips! To fully benefit from the support that Philips offers, register your soundbar at Main unit www.philips.com/support.
(Standby-On) button Connectors Power Action Function This section includes an overview of the State connectors available on your soundbar. Follow source state Semi Press • Wi-Fi is connected. Standby • It supports Play-fi button and Airplay2 once Chromecast, Spotify connect, work with Alexa.
(Source) Remote control • Press to select an input source for soundbar. This section includes an overview of the • In BT mode, press and hold for 3 remote control. to disconnect from current seconds BT connected devices and enter the Bluetooth pairing mode.
Prepare the remote Precautions Concerning Batteries control • Be sure to insert the batteries with correct positive “” and negative “” polarities. • The provided remote control allows the • Use batteries of the same type. unit to be operated from a distance. Never use different types of batteries •...
Placement WARNING! • To prevent injury, this apparatus must be securely attached to the floor/wall in For best results, place your Soundbar as accordance with the installation instructions. shown below. • Suggested wall mounting height: ≤ 1.5 meters. • You are recommended to install the TV first before wall mounting the soundbar.
3 Connect Note • The full Dolby Atmos experience is only available when the soundbar is connected to This section helps you connect your the source via a HDMI 2.0 cable. soundbar to a TV and other devices, and • The soundbar will still function when connected then set it up.
HDMI (eARC/ARC) Using a high speed HDMI cable, connect the HDMI out (eARC/ARC) - To TV connector on your soundbar to the HDMI ARC connector on the TV. Optical Note • Your TV must support the HDMI-CEC and ARC Optical out function.
By connecting this unit and mobile phones, tablets (such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound app powered by DTS Play-fi to control the soundbar to listen to audio files.
Page 15
Two tone Download and install the Philips slowly, it indicates that the speaker is Sound app powered by DTS Play-fi on entering the Wi-Fi setup mode. a phone or tablet. Fast blink Slow pulse Launch the Philips Sound app Philips Sound powered by DTS Play-fi.
Page 16
• When the first time set up is not successful, please close the Philips Sound app powered by DTS Play-fi. Restart the app and try the setup again. AirPlay setup Use AirPlay to set up the Wi-Fi connection After connection, you can change of iOS device (iOS7 or later) and soundbar.
Learn more about DTS Play-Fi enabled speakers at play-�.com Connect the soundbar to Connect Speakers Philips Play-fi enabled TV Power up your DTS Play-fi TV connected to the internet. DTS Play-Fi TV Audio » TV sound is muted.
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or on the remote control to select This section helps you use the soundbar the Optical, HDMI in, HDMI eARC/ARC, to play audio from connected devices. BT, USB mode. »...
ATMOS 00: Minimal effect. • Then press the / (Left / Right) navigation buttons change the ATMOS 01: Small height effect. • settings. ATMOS 02: Medium height effect. • ATMOS 03: Big height effect. • Description Display Note Select audio 7.1.2/Standard/ Ai Surround options •...
Page 20
Dynamic Range Control (DRC) Dialogue mode You can apply dynamic range control to Dialogue mode improves the clarity Dolby Digital tracks. of dialogue and vocals in movies, TV programs and podcasts by adjusting the ON : Optimization the dynamic • tonal balance of this product.
Setup Menu Mic in Mic in IR out Insert Mic The unit allows you to configure advanced settings to provide you with an Audio settings Set calibration even better experience. Press the (MENU) button on the remote control to open the menu. Select the content with / (Down / Up) on the remote controller.
Page 22
Adjust speaker level Standby The unit automatically turns to Standby : FL -5 ~ FL +5 • Front Left mode after about 15 minutes if the TV or Front Right : FR -5 ~ FR +5 • the external unit is disconnected (or USB, BT Subwoofer : SW-5 ~ SW +5 •...
Bluetooth, search for and such as wall, metallic casing that covers the select “Philips Fidelio FB1” to start device, or other devices nearby that operate in connection (see the user manual the same frequency.
Multi-point control Dolby Atmos - Dolby Atmos Dolby Digital Plus The product support multi-point feature, and can connect two Bluetooth devices DTS Discrete Surround at same time (such as an iPad, iPhone, iPod touch, Android phone, or laptop). DTS-ES 6.1 Matrix •...
Press the button repeatedly on the unit or on the remote control to select the USB mode. » USB is displayed on the display panel. During playback: Button Action Start, pause or resume play. Skip to the previous or next track. Tips •...
5 Product Speakers impedance 8Ω specifications 1200 x 73 x 125 Dimension (W x H x D ) Weight 7.2 kg Note Operating 0°C - 45°C • temperature Specifications and design are subject to change without notice. Bluetooth / Wireless USB direct version 2.0 Full Speed Bluetooth profiles...
Page 27
Supported audio formats Format Function HDMI Input HDMI eARC HDMI ARC OPTICAL LPCM 2ch √ √ √ √ LPCM 5.1ch √ √ √ √ LPCM 7.1ch √ √ Dolby Digital √ √ √ √ Dolby Digital Plus √ √ √ Dolby TrueHD √...
TV before you request service. If you is muted. still have a problem, get support at Audio and video are not synchronized. www.philips.com/support. • Press enter setting menu, select ‘AV SYNC’ to synchronize the audio with Main unit the video.
Page 29
Certain network service or contents available through the device may not be accessible in case the service provider terminates its service. • When the first time set up is not successful, close the Philips Sound app powered by DTS Play-fi. Restart the app.
Page 30
Trademarks: To control this AirPlay 2 -enabled speaker, iOS 11. 4 or later is required. Use of the Works with Apple badge means that an accessory has been designed to work specifically with technology identified in the badge and has been certified by trademarks of Apply Inc.
Page 31
Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited.