Connect the IR pass-through cable 13 Connect to Power Pairing with Subwoofer (FW1) via proprietary RF link Connect to Wi-Fi (Wireless Operation) Connect the soundbar to Philips 4 Use your Soundbar Select Modes Enjoy Dolby Atmos sound Choose your Sound Setup Menu...
1 Important from the power outlet immediately. Contact Consumer Care to have the safety product checked before use. • instructions heat sources, including direct sunlight. • Read and understand all instructions ventilation slots or other openings before you use your product. If damage on the product.
• Care for your product objects on power cords or on other electrical equipment. • If the product is transported in product. temperatures below 5°C, unpack the product and wait until its temperature matches room Care of the environment temperature before connecting it to the power outlet.
Declaration of conformity interference requirements of the European community. Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU Declaration of Conformity on www.philips.com/support.
et votre corps. Cet transmetteur ne FCC information doit pas être co-situé ou opérant en liaison avec toute autre antenne ou transmetteur. NOTE: • and found to comply with the limits Des câbles blindés doivent être for a Class B digital device, pursuant to utilisés avec cet apparei l pour assurer la conformité...
User Manual are for reference only, actual product may Congratulations on your purchase, vary in appearance. Main unit www.philips.com/support. main unit. What’s in the box Check and identify the items in the • Soundbar • IR pass-through Cable •...
(Standby-On) button Connectors Power Action Function State connectors available on your soundbar. Follow source state Semi Press • Wi-Fi is connected. Standby button and Airplay2 once Chromecast, Spotify connect, work with Alexa. Press Mic in IR out Standby hold the lower power >2 consumption mode.
(Source) Remote control • Press to select an input source for soundbar. • remote control. to disconnect from current seconds Bluetooth pairing mode. 3 Navigation buttons (Left/Right) • Skip to the previous or next track in • structure. / (Up/Down) •...
Prepare the remote Precautions Concerning Batteries control • Be sure to insert the batteries with correct positive “ ” and negative “ ” polarities. • • Use batteries of the same type. unit to be operated from a distance. • Even if the remote control is together.
Placement • For best results, place your Soundbar as accordance with the installation instructions. shown below. • • before wall mounting the soundbar. With ~50mm/2.0" 743mm / 29.2” 3.5-4mm/0.14 -0.16" 4mm/ 0.16" Wall mount >32mm/1.26" Note • Improper wall mounting may result in accident, injury or damage.
3 Connect Note • available when the soundbar is connected to the source via a HDMI 2.0 cable. • then set it up. via other methods (such as a Digital Optical cable) but they are unable to support all of the Note is to connect via HDMI, in order to ensure full Dolby support.
HDMI (eARC/ARC) Using a high speed HDMI cable, connect the HDMI out (eARC/ARC) - TV connector on your soundbar to the HDMI ARC Optical Note • Optical out function. HDMI-CEC and ARC must be set to On. • • be labeled Spdif or Spdif out. manual.
(Green) Solid (Wireless Operation) (For iOS and Android version) By connecting this unit and mobile phones, tablets (such as iPad, iPhone, iPod touch, Android phones, etc.) to the same Wi-Fi network, you can then use the Philips Sound 14 EN...
Page 15
Two tone Download and install the Philips slowly, it indicates that the speaker is entering the Wi-Fi setup mode. a phone or tablet. Fast blink Slow pulse Launch the Philips Sound app Philips Sound instructions in the app to connect •...
Page 16
If you want to change from one network to another, you need to set up the connection again. Press hold down the (Wi-Fi) button on the soundbar for 8 seconds to reset the Wi-Fi Return to Philips Sound App to name connection. the device. • AirPlay setup...
WPS mode Surround sound Setup If your router has Wi-Fi Protected Setup Follow the on-screen setup. (WPS), you can set up the connection without entering a password. Press and hold the (Wi-Fi) button for 3 seconds on the soundbar. You will hear a tone and the Wi-Fi light will begin double blink.
4 Use your Select Modes Soundbar Press the button repeatedly on the unit or on the remote control to select the Optical, HDMI in, HDMI eARC/ARC, to play audio from connected devices. » Before you start the display. • Make the necessary connections described in the quick start guide Display Status...
ATMOS 00 • Then press the / (Left / Right) navigation buttons change the ATMOS 01 • settings. ATMOS 02 • ATMOS 03 • Description Display Note Select audio Upmix/Standard/ Ai Surround options • For non-HDMI connections (such as use of USB, Bluetooth, OPTICAL or AUDIO IN), only limited Dynamic Range Control NEURALX...
Page 20
Dynamic Range Control (DRC) Dialogue mode You can apply dynamic range control to Dialogue mode improves the clarity Dolby Digital tracks. programs and podcasts by adjusting the • tonal balance of this product. range DLG 0 ~ DLG 6 • •...
Setup Menu Mic in Mic in IR out Insert Mic advanced settings to provide you with an Audio settings Set calibration even better experience. Press the remote control to open the menu. Select the content with / (Down / Up) on the remote controller. Press selection.
Bluetooth, search for and such as wall, metallic casing that covers the select “Philips Fidelio FB1” to start device, or other devices nearby that operate in connection (see the user manual the same frequency.
Multi-point control Dolby Atmos - Dolby Atmos Dolby Digital Plus and can connect two Bluetooth devices at same time (such as an iPad, iPhone, iPod touch, Android phone, or laptop). • second Bluetooth device connect the soundbar. • When the second Bluetooth device stream its audio to soundbar, the playback.
Press the button repeatedly on the unit or on the remote control to select the USB mode. » USB is displayed on the display panel. Button Action Start, pause or resume play. Skip to the previous or next track. Tips •...
Page 26
5 Product Speakers impedance specifications 1200 x 73 x 125 Dimension (W x H x D ) Weight 7.2 kg Note Operating 0°C - 45°C • temperature without notice. Bluetooth / Wireless USB direct version 2.0 Full Speed 500mA Bluetooth version Extension Codec Sample Rate Bitrate Bluetooth frequency...
Page 27
Supported audio formats Format Function HDMI Input HDMI eARC HDMI ARC LPCM 2ch LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby Digital Plus Dolby Atmos - Dolby Digital Plus The product shall comply with Dolby indication mandatory requirements marked below Format Indication Input Dolby Audio format...
Page 28
If you is muted. still have a problem, get support at Audio and video are not synchronized. www.philips.com/support. • Press enter setting menu, select ‘AV SYNC’ to synchronize the audio with Main unit the video.
Page 29
• Make sure the device is connected to the Wi-Fi. • Certain network service or contents available through the device may not be accessible in case the service provider terminates its service. • successful, close the Philips Sound the app.
Page 30
Trademarks: 4 or later is required. Use of the Works with Apple badge means that an accessory has been designed Apply Inc. , registered in the U. S. and other countries. Apple® and AirPlay® are trademarks of Apple Inc., registered in the U.S. and other countries. Play-Fi and Play-Fi logos are registered trademarks or licenses Interface, HDMI trade dress and the HDMI Logos...
Page 31
Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of is product has been manufactured by and is sold under the responsibility FB1RE...