TO SET ILLUMINATION PATTERN FOR
CALL INDICATION LAMP
The procedure below shows how to set the illumination pattern
(color of Call Indicator Lamp).
1.
Press Menu key while terminal is in an idle state.
□
2.
Select
1 User Settings.
□
3.
Select
1 Incoming Call.
□
4.
Select
4 illumination.
□
5.
Select
2
Internal Call.
Do not select "
1
Illumination which has been selected in "
will be applied to both external and internal incoming calls.
6.
Select a desired pattern.
The enabled item is highlighted.
External Call".
Internal Call"
2
TO ENABLE/DISABLE RTP ALARM
The procedure below shows how to enable/disable RTP alarm.
1.
Press Menu key while terminal is in an idle state.
□
2.
Select
1 User Settings.
□
3.
Select
2 Talk.
□
4.
Select
1 RTP Alarm.
□
5.
Select
0 Automatic,
(see the following table).
No.
Menu Items
Follow the setting on the System. If no
0
Automatic
setting is made in the System, the default
setting (Alarm=ON) is applied.
1
Disable
Follow the setting on the terminal (OFF).
2
Enable
Follow the setting on the terminal (ON).
■For the setting on the System, contact the system
administrator.
■The enabled item is highlighted.
26
TERMINAL SETUP
□
□
1 Disable or
2 Enable
Descriptions