Indicator Status During Normal Operation - Epson EH-LS9600e User Manual

Troubleshooting

Indicator status during normal operation

Indicators
Standby condition
Standby condition
(Standby Mode is set to
Communication On.)
WirelessHD standby sta-
(blue)
tus
Warm-up in progress
Cool-down in progress
(blue)
Projection in progress
Standby condition
(Standby Mode is set to
Communication On.)
(blue)
c
•
Under normal operating conditions, the
•
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
Settings - Operation - Illumination
s
Status
When you press the
button on the control panel, projection starts.
When you press the
button on the control panel, projection starts.
When you start playback on the AV device connected to the
WirelessHD Transmitter, projection starts.
The power-off operation is disabled while the projector is
warming-up.
All operations are disabled while the projector is cooling-
down. The projector enters standby condition when cool-
down is complete. If for any reason the power cord is discon-
nected during cool-down, wait until the projector has cooled
down sufficiently, reconnect the power cord, and then press
the
the control panel.
The projector is operating normally.
When you press the
button on the control panel, projection starts.
and
o
p.91
103
: Lit
Remedy
button on the remote control, or the
button on the remote control, or the
button on the remote control, or the
button on the remote control, or the
indicators are off.
: Flashing : Off
button on