Table of Contents
Advertisement
3. Operation Procedure
1) Confirm that the probe is cleaned, disinfected and/or sterilized.
2) Connect the probe, operate the main unit, and adjust the image
according to the instructions given in the operation manual for
the main unit.
3) Relationship between direction of the probe and the image is shown
in Fig. 2. The right-left orientation mark on the image indicates
the direction of the index mark on the probe.
Fig. 2
4) Use under sterile condition, protecting the probe by using covers
is recommended. Some Latex material may create allergic reaction.
Please use allergy free material covers.
5) After the use of the probe, it should be cleaned and disinfected
and/or sterilized immediately, and then store it in an adequate
place.
Relationship between Index Mark
and Right-left Orientation Mark
- 4 -
Index mark
Right-left
orientation mark
Q1E-EP1152
Advertisement
Table of Contents
