LG CBV42 Owner's Manual page 19

<Figure 2-17: Advanced Settings for View Connec-
tion Server>
y Desktop Name to Select
Enter the name of the pool/desktop which the
user client uses upon starting a session.
y Port
For the default setting, leave the port field empty.
When the VMware View Connection Server uses
the SSL authentication, enter 443 in the Port field.If
the server where a user tries to access uses a port
other than a general port, enter the port.
Auto Connect
y
If this option is enabled, the selected VMware View
Connection Server is automatically connected
when the user client is powered on.
If the Auto Connect option is enabled, you should
turn the user client off and turn it on again at least
once.
Remember Username
y
If this option is selected, the username which is
previously used to access the VMware View
Connection Server is automatically entered in the
username field.
Auto Launch if Only One Desktop
y
If this option is selected, connection is established
to the desktop when there is only one virtual desk-
top that a user wants to access.
Use OSD logo for View banner
y
If this option is enabled, you can change the OSD
logo of PCoIP during the login.
NOTE
The OSD logo can be uploaded using the
y
Webpage Administration Interface.
Prefer GSC-IS
y
If this option is selected, the GCS-IS interface
is used when a smart card supports more than
one interface. If the smart card supports only one
interface, it is not used.
NOTE
This setting is provided only when a smart
y
card is used.
Enable Peer Loss Overlay
y
If this option is selected, the "Network Connection
Lost" message is displayed on the screen when it
is confirmed that the network is disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
Enable Preparing Desktop Overlay
y
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when the
user is logged in.
Disconnect Message Filter
y
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
Using CLOUD Solution
19