Operating The Appliance; Controls; Switching The Appliance On And Off; Intensive Setting - Bosch DID106T50 Instruction Manual

Operating the appliance

Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.

Controls

Use the remote control to set and adjust the various different
functions of your appliance.
Note: The remote control requires CR2032/3 V batteries. Refer
to the Changing the batteries in the remote control section for
instructions on how to insert the batteries.
Note: Point as accurately as you can with the remote control to
the infrared receiver on the extractor hood's control panel.
Note: Heat and penetrating moisture may damage the remote
control. Never expose the remote control to intense heat or
moisture.
Remote control
Operating buttons
Button Explanation
Switch the extractor hood on and off
"
Switch the lighting on and off
k
Switch on intensive mode
=
Switch on the run-on function/intermittent
K
function
Increase the fan setting
@
Decrease the fan setting
A
Extractor hood's control panel
Infrared receiver
(
Operating buttons
0
Saturation indicator
8
Operating buttons
Button Explanation
Switches the extractor hood on and off
#
1 Switches on fan setting 1
2 Switches on fan setting 2
Switches on fan setting 3/intensive mode
3/
G
Switches the lighting on and off
=

Switching the appliance on and off

Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a high
fan setting.
Switching on the appliance
Press the button on the remote control or the
"
the extractor hood's control panel.
The extractor hood starts at fan setting 1.
Button 1 lights up.
Selecting the fan setting
To apply a fan setting, press the
control or button 1, 2 or 3/
the extractor hood's control panel.
Button 1 lights up when fan setting 1 has been selected.
Buttons 1 and 2 light up when fan setting 2 has been selected.
Buttons 1, 2 and 3/ light up when fan setting 3 has been
G
selected.
Buttons 1 and 2 light up and button 3/
mode has been selected.
Switching off the appliance
Press the button on the remote control or the
"
the extractor hood's control panel.

Intensive setting

Activate intensive mode to eliminate strong smells and odours.
In this mode, the extractor hood operates at its maximum fan
setting for a short time. After a short time, it automatically
switches back to a low setting.
Switching on
Press the button on the remote control or press and hold
=
button 3/ on the extractor hood's control panel.
G
Buttons 1 and 2 light up and button 3/
mode is now activated.
Note: After 6 minutes, the extractor hood automatically
switches back to the fan setting that was set beforehand.
Switching off
Press the button on the remote control or the
=
extractor hood's control panel.
button on
#
or button on the remote
@ A
for the fan setting you require on
G
flashes when intensive
G
button on
#
flashes. Intensive
G
button on the
#
5