Changing The Basic Set- Tings; Cleaning And Servicing; Tips On Appliance Care; Cleaning The Drum - Siemens WM14VMHADN User Manual And Installation Instructions

Hide thumbs Also See for WM14VMHADN:
Table of Contents

Advertisement

en Cleaning and servicing
16.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
 and, at the same time,
2.
turn the programme selector to po-
sition 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
To change the value, press -  ⁠   +.
4.
To save the changes, switch off
5.
the appliance.

Cleaning and servicing

17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Tips on appliance care
Wipe down the
housing and the
control panel
with nothing but
water and a
damp cloth.
46
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Keep the appli-
ance door and
detergent drawer
open after use.
17.2 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum Clean programme
without laundry.
Add washing powder.
17.3 Cleaning the detergent
drawer
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Pull out the detergent drawer.
1.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.

Advertisement

Table of Contents
loading

Table of Contents