Table of Contents
Advertisement
To Transmit:
1 Select your desired system and group (or group
and channel).
2 Press the A key to enter Selcall Mode.
3 Use the encoder to select the ID of the station
you want to call.
4 Press the A key to enter Status Mode.
5 Use the encoder to select the status you want to
transmit.
6 Press the PTT switch to initiate the Status call.
•
"COMPLETE" is displayed when the call has been
successfully transmitted.
To Receive:
The mail icon (
message will appear when a Status call is received.
•
The display alternates between the caller ID and the
message.
Press any key to return to Normal Operation Mode.
24
) will flash and a calling ID or text
Advertisement
Table of Contents
