Installing The Cover Over The Universal Connector; Installing The (Optional Kmc-25) Speaker/ Microphone - Kenwood TK-2140K Instruction Manual

Installing the Cover over the Universal Connector

If you are not using the
optional KMC-25 speaker/
microphone, install the
cover over the univeral
connector using the
supplied 4 x 6 mm screw.

Installing the (Optional KMC-25) Speaker/ Microphone

1 Insert the guide of the speaker/ microphone
connector into the groove of the universal
connector.
2 Secure the connector in place using the attached
screw.
4