Conventional Operation (Conventional Format); Transmitting; Receiving - Kenwood 229900 Instruction Manual

CONVENTIONAL OPERATION (Conventional Format)

■ Transmitting

1 Select the desired group and channel using the
encoder and the Group or Channel keys.
2 Press the key programmed as Monitor to check
whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the
microphone. Release the PTT switch to receive.
• For best sound quality at the receiving station, hold
the microphone approximately 1.5 inches (3 ~ 4 cm)
from your mouth.

■ Receiving

1 Select the desired group and channel using the
encoder and the Group or Channel keys. (If the
Scan function has been programmed, you can
switch it ON or OFF as desired.)
2 When you hear a caller's voice, readjust the
volume as necessary.
19