Table of Contents
Advertisement
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.
•
Do not use old and new or different types of
batteries in combination.
•
Batteries contain chemical substances, so they
should be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
2
Press
on the main unit to start
installation.
[AUTO] (auto) is displayed.
»
»
The unit automatically stores radio
stations with sufficient signal strength.
»
When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
Set clock
1
In the standby mode, press CLOCK to
activate the clock setting mode.
»
The 12 hour or 24 hour format is
displayed.
2
Press ALBUM/PRESET+/- repeatedly to
select 12 hour or 24 hour format.
3
Press CLOCK to confirm.
The clock digits are displayed and
»
begin to blink.
4
PressALBUM/PRESET+/- to set the hour.
5
Press
/
to set the minute.
6
Press CLOCK to confirm.
Tip
•
To view the clock during play, press
Turn on
1
Press .
The unit switches to the last selected
»
source.
Switch to standby
1
Press
to switch the unit to standby
mode.
The backlight on the display panel
»
turns off.
The clock (if set) appears on the
»
display panel.
CLOCK.
EN
13
Advertisement
Table of Contents
