Toshiba GN-1050 Operator's Manual page 29

1. Setting Up Wireless Network
8.
SUPPLEMENT: If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
9.
Selecting WPAPSK/WPA2PSK security mode
The WPAPSK/WPA2PSK is an authentication method using the PSK (Pre-Shared Key)
between the Access Point and other wireless devices.
To access the wireless network using the WPAPSK/WPA2PSK authentication, the
same PSK Path Phrase must be assigned in both the Access Point and other wireless
devices. If the PSKs are same between the Access Point and other wireless devices,
the Access Point allows them to access the wireless network through the Access Point.
28
TRANSMIT RATE
Select the transmit data capacity for wireless communication. If you do not have
to specify the fixed rate, select [AUTO]. When [AUTO] is selected, this
equipment will use appropriate rate depending on the condition.
Generally select [AUTO]. The communication may fail unexpectedly if you
select a static transmit rate.
Confirm the settings and press the [FINISH] button.
• The shut down screen is displayed.
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
GN-1050 Operator's Manual — Setting Up the Infrastructure Mode