Table of Contents
Advertisement
PC In
With a high-performance D/A converter on this unit, you
can enjoy a pure playback sound from your PC digitally
transmitted to this unit without any PC-specific noise.
For OS : This unit is tested to be working with Windows
8/7/Vista.
Connection
Code to use: USB cable (Type A - Type B)
1
Connect the USB cable to the PC IN terminal, then
connect to the PC.
2
Turn on a PC to boot the OS. Wait until the OS boots.
3
Press the ON/STANDBY button of this unit to power
on. This unit's driver will automatically be installed to
the PC and recognizes it as "USB speaker".
To the USB socket
(Type B)
USB connection cable
(Not supplied)
Listening to audio data playing on a PC
1
Turn on a PC to boot the OS. Wait until the OS boots.
2
Press the ON/STANDBY button of this unit to power
on.
3
Press the FUNCTION button (main unit) repeatedly or
INPUT button (remote control) until "PC IN" is
displayed.
Start playback your desired song in the PC music
4
software.
Notes:
Only PLAY and PAUSE can be operated from this unit.
Volume can be controlled from this unit. However,
master volume from PC will be disabled.
If there is no sound when playback, please check if the
volume of music or video software is muted. Adjust the
volume accordingly.
If there is still no sound output or error message
appears on PC, exit the application software and
launch it back again. Please also check if "USB
speaker" is selected in the PC setting. For details, refer
to the user's manual of the PC.
It is not possible to adjust the volume on the keyboard.
USB connection cable length must be 3 meter or
below.
Sharp does not guarantee proper operation for all
computers, internet browser, audio/video application
or online audio/video streaming application.
E-15
PC
To the USB port
(Type A)
Advertisement
Table of Contents
